This article helps you set up your Adyen payment terminal from delivery through to processing your first payment. Some steps include a link to more detailed instructions.
PED terminal set up
Step 1: Before you open the package
Payment terminals process sensitive card data, so you must verify that the terminal you received is the correct one, supplied by Adyen, and has not been tampered with.
Check that:
Using theāÆtrack & traceāÆlink, track the order with the carrier to verify that they confirm having delivered the payment terminal.
The shipping box containing the terminal has not been opened and the tamper-evident security packing tape is intact.
TheāÆserial numberāÆ(S/N) on the box is the same as the one provided.
Step 2: Unpack the terminal
When unpacking your terminal, follow the steps below:
Open the box, take the terminal out of the box, and verify that theāÆserial numberāÆ(S/N) on the terminal is the same as the serial number on the box.
Inspect the terminal for tampering. Check for missing screws, additional wires or labels, holes in the device, and anything inserted in or attached to any part of the terminal.
Turn on the terminal: connect the terminalāÆto a power supply. Let the battery charge for at least four hours while you continue with the next steps.
Step 3: Basic setup
To complete the basic setup of the PED terminal, follow the steps below:
Press and hold the power button until the display turns on.
On theāÆWelcomeāÆscreen, select your language.
After selecting your language on theāÆWelcomeāÆscreen, select the arrow button.
On theāÆSetup Wi-FiāÆscreen, select theāÆ+āÆsign.
Turn on theāÆWLAN toggle.
Select a Wi-Fi network from the list, or select theāÆ+āÆsign and add the name (SSID) of the Wi-Fi network.
Enter the Wi-Fi password.
SelectāÆOK.
The terminal sets the network as the default automatically and connects to it.
You'll now see a Wi-Fi icon at the top of the display.
You can change the Wi-Fi connection settings at any time.
Step 4: Store screen and updates
Only complete this step if the PED displays the request.
On theāÆselect storeāÆscreen, select your store and then select the tick button. If the store shown is not your store, use the edit button to change it.
If theāÆstoreāÆscreen doesn't show, wait until the next synchronisation with the Adyen platform (on average, three hours) and try again.
The PED will run all required updates. Allow all updates to complete before proceeding to step 5.
Step 5: Start processing payments
When you have completed the steps above, you are then ready to process payments!